08 July 2015

Intex Aqua Y2 Pro Privacy Protection password removed done 100% tested

Posted by
08 July 2015
Sponsored Links
Intex Aqua Y2 Pro Privacy Protection password removed done 100% tested


This flash file is factory, you can use when your device hang on logo problem, restarting problem, security lock problem, password lock problem, calling problem etc software related problem then you can use this flash file but remember before you use this flash so some impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Intex Aqua Y2 Firmware download here
SP_Flash_Tool_v5.1343.01 download from here

Required for Privacy lock remove:

  • Intex Aqua Y2 Pro device with battery charged
  • Intex Aqua Y2 Firmware or Tool
  • Micro usb cable
  • Computer or Laptop

Procedure:

  • Download Firmware or tool from above link
  • Open Flash tool and choose Format menu
  • Choose Auto Format flash
  • Choose second option Format whole flash except Bootloader
  • Click on Start Button
  • Press and hold Boot key and insert usb cable
  • Wait until full format device (see below image done format in flash tool)
 
  • Now Choose Download Option
  • Click on Scatter-loading button and choose scatter file
  • Choose Download only button
  • Click on Download button
  • Press and hold boot key and insert usb cable
  • You are done from Privacy protection password

Screenshot:



Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box