21 May 2015

Huawei Y600-U20 Flash done by Sptool 100% tested

Posted by
21 May 2015
Sponsored Links
You can use this tutorial when your device to be pattern lock, screen lock, security code, hang problem, restarting problem, then you can following this tutorial but remember you can't save data if you use this tutorial your data loss like contacts, notes, photos etc it is very easy to use just following this tutorial step by step and also remember must your device battery charged up to 80% and also check your micro usb cable that is also impotent in flashing so all are remember impotent notes are mention as above now let's go how to flash Huawei Y600-U20 in sptool.

Must read before use:
If want to repair device, can try to repair it by. have to charge a battery with any charger and charged it by 92%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

Below given software issues if any type in your device then you can use this guide:
This flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.

Huawei Y600-U20 Firmware download here

Required for Flash

  • Huawei Y600-U20 device with battery charged
  • Huawei Y600-U20 Firmware or sptool
  • Micro USB cable
  • Computer or Laptop

Procedure:

  • Open SP tool
  • Click on Scatter button and choose scatter file from above firmware folder
  • Now Click on Download button
  • Press and hold Boot key and insert usb cable
  • You are done
Huawei Y600-U20 Flash done in sptool:
Sponsored Links

27 comments:

  1. Replies
    1. Press and hold Volume Up button :)

      Delete
    2. Just volume up? nothing swhowing

      Delete
    3. I think in USB Socket issue in the device

      Delete
  2. after flash white screen
    any body other ver file

    ReplyDelete
    Replies
    1. Flash with this file Download HERE, click here to image tutorial HERE

      Delete
    2. Which error comes on displayed ?

      Delete
  3. Good day Sir, can I do this method on windows XP?

    ReplyDelete
    Replies
    1. Yes you can use windows xp

      Delete
    2. do I need to install any driver if I'm using windows XP? because I'm doing this for three days and nothing happens. I follow all the steps. did I miss somthing?

      Delete
    3. use this method first go to device manager and there check other driver and update from downloading driver

      Delete
    4. it's call manual method

      Delete
  4. sir after i flash my phone still hang on logo then theres no recovery mode

    ReplyDelete
    Replies
    1. How the hell are we suppose to do HardReset without recovery menu ?

      Delete
  5. Replies
    1. Any Listen sound when device connect with computer or laptop if listened then try with method i think it is possible

      Delete
  6. hello sir . my phone dead after flash only vibrate plzz help

    ReplyDelete
    Replies
    1. Charge your battery :) and try to turn on device

      Delete
    2. me too , my phone wont charge and only vibration

      Delete
    3. Charge your battery :) and try to turn on device if not done then use another battery

      Delete
  7. Goodness! After I flash it, only black screen and vibration. What should I do?

    ReplyDelete
    Replies
    1. I think battery issue, charge battery and try again

      Delete
  8. Replies
    1. Sorry for that download without password flash file here

      Delete

If any problem just write down your message on below comment box