-->
Wednesday, February 18, 2015

Micromax A87 Flash done with Simple step 100% tested

Posted by
Wednesday, February 18, 2015
Sponsored Links
Micromax A87 Flash done with Simple step 100% tested

Micromax A87 Model Image:

This device how to flash ? if you can search in internet so mostly say of flash from SD Card but here i put tutorial very different and easy, this is tested by me two times so if you following this tutorial so you can easy flash without any box because this is tested here need to required files also put because this is every difficult tool but before flash must check device of hardware because if hardware problem in device then you try and try flash so not working because this is hardware issue and before flash starting also check device battery must be full charged if not charged battery so your device processing stop between flashing because your device battery low so this is impotent, here step by step put tutorial mostly people better understand this is simple language here some need tool so carefully download first after try flashing. Must read first this tutorial full after try to flash because you wrong understand will be dead of device this is impotent also so now let's go how to flash Micromax A87 with different tricks.

Download Area

 Required For Flash:


  • Micromax A87 Device with battery charged
  • Micromax A87 tested Firmware
  • Fastboot software for flash
  • Micro USB cable
  • Computer or Laptop

Procedure:


  • Download both of files who one check above link
  • Extract to both of files from zip
  • Open Firmware folder
  • Select All files and copy that
  • Open Fastboot folder
  • Paste in Fastboot folder
  • Double click on Download (if double click download button then you can see like below image)


  • Now Press and Hold Volume Down + Power button until your device connect with fastboot drivers
  • If you device connect with fastboot driver then your can see flashing start like below images





  • After finished flash can messages in flash box message like above picture
  • Last Disconnect your device and take out battery in to device
  • Again insert battery in to device now start your device
  • you are done. 
Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box