09 November 2014

Moto G & E (2nd Ge) Moto G LTE Moto X Moto X (2nd gen) Full flash guide and Firmware Free HERE

Posted by
09 November 2014
Sponsored Links

Moto G & E (2nd Ge) Moto G LTE Moto X Moto X (2nd gen) Full flash guide and Firmware Free HERE


If want to repair Moto G & E (2nd Ge) Moto G LTE Moto X Moto X (2nd gen) device, can try to repair it by. have to charge a battery with any charger and charged it by 95%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

You can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.

Note: Use mfastboot command instead of normal fastboot command
Ex : mfastboot flash boot boot.img

  • Setp 1
    • Download fimrares and extract it
    • Must usb debugging mode on. from here --> go to setting --> Developers Option and tick the USB debugging
    • Turn off your mobile and open in bootloader mode. via press and hold power button + Volume down button till you see same text on screen

    • Now Open the folder where you have to extracted Firmware files and open command there. via Hold Shift Key and Right Click anywhere in the folder then Click Open Command Prompt Here
    • If your Firmware File has tar.gz extension,
    • then type below givn command
    • flashall.bat /eu
    • Wait for the Firmware files to be flashed on your device then it will boot automatically
    • Now if your Firmware files have xml.zip extension extract and flash via fastboot
  • Type Below given command to flash the device
    • Example For Moto G
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
    • After all done your phone will reboot automatically
  • Step : 2
    • Moto X Flashing via RSD Lite
    • Download RSD Lite
    • extract the downloaded firmware and find a file with .XML extension. Right click on this file and select Open with.and then open it using Notepad or any XML editor. Now find the below given string and delete it.
    • :: code ::<step operation="getvar" var="max-download-size" />
    • Save the changes
    • can't your mobile in bootloader mode(fastboot mode)
    • Run Rsd lite there select the firmware
    • Press start
    • Wait till the firmware is flashed and when it is complete, your phone will reboot

Sponsored Links


If any problem just write down your message on below comment box