30 June 2014

Micromax A51 Flash or Tools with Tutorials also with easy flash procedure

Posted by
30 June 2014
Sponsored Links

Micromax A51 Flash or Tools with Tutorials also with 
easy flash procedure

Micromax A51 you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related, if the error occurs of USB not recognized than your USB is not working.if battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box i will try my best to help you.

If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 95%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, SD card or any other suitable devices. If you are doing by your own. do it at your own risk as we don't take any responsibility if your device is damaged

Procedure 1 via DFU Mood

  • Download Flash or Tools
  • Extract Firmware from Winrar
  • Open Firmware folder
  • Attach Android phone with computer (Note : Attach phone without battery)
  • Double click on " DFU " exe file, this file in to be Firmware folder
  •  You are done flash.

Procedure 1 via DFU Mood

Install driver

Before running this tools, you must install some driver (if your PC OS is XP or Win 7 32bit, you need to install this driver 20120615\BrcmFlashTool_V2.0.5.0\BrcmFlashTool_V2.0.5.0\Broadcom_USB_Download_Driver_1_8_6_27.rar and if your PC OS is Win7 64bit, you need to install this driver ..\bcm21552DownLoad\MTT\ ).


Double click” FlashTool.exe”


See below pic:

Under “Image path” ,select AP where it is. Others on the left set as default 。then click two “Generate”icons,txt file will appear in each menu,if txt file information as below pic, then the target file need to download generated successfully.

Set”COM PORT” on the right,set to numbers in “Broadcom USB to Serial(COMXX) COM” as below pic。
Then click “ok” and setting completed。

click”Start”,take off battery from handset,then put battery in,connect USB and download starts.

Download Firmware HERE
Download Flash Tools HERE

Download Drivers HERE

Sponsored Links

1 comment:

If any problem just write down your message on below comment box