03 January 2018

How to remove FRP lock in Tecno i3

Posted by
03 January 2018
Sponsored Links
This guide only for miracle box users cause this is done only on that miracle box support only on 2.64 above version so carefully use you can use another chines tool which option of frp lock remove Tecno i3 this is tested in Miracle box let's go do how to remove frp lock

Tecno i3 want to remove frp lock in this device, can try to repair it by. have to charge a battery with any charger and charged it by 95%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

Tecno i3 you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method can be used with box impotent to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try

Required

  • Tecno i3 Android phone with good battery charged
  • Tecno i3 USB Driver
  • Miracle box (another chines box which option available for remove frp lock)
  • Computer or Laptop

Procedure:

  • Install MediaTek USB Driver in your computer or laptop
  • Open Miracle box
  • Go to MTK Tab and choose Server Tab
  • Tick Format option
  • Untick Safe Mode only
  • Tick Auto & Advance(Frp) option
  • Choose Boot Select : 8th Boot(MT65xx & MT67xx/8127)
  • Choose TECNO i3pro below of the boot option
  • Just click on Start button and Insert USB cable to device
  • Wait until complete
Tecno i3 frp removed Screenshot:


Tecno i3 frp removed video:
Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box