Redmi 17 / poco c95 pro users commonly run into the device getting stuck in Recovery Mode, especially due to corrupted cache or system files. The stock ROM below is a direct fix for this. This build is made specifically for the Mediatek Helio G91 Ultra chipset, so confirm your exact model number (e.g. 2606FRN72Y (Global), 2606FRN72L (Latin America, Japan)) before downloading.
Whether your Redmi 17 / poco c95 pro (codename: leedsa) is soft-bricked, hanging on the boot logo, or you just want to move back to stock MIUI/HyperOS after trying a custom ROM, this guide has what you need — every fastboot and recovery firmware build for this device, reliable download servers, and a full flashing walkthrough.
One thing worth knowing upfront — fastboot ROM flashing wipes the phone completely, so only go that route if you're fine starting fresh. For a lighter repair that doesn't touch your files, the recovery ROM is normally the better choice.
Device Overview
| Brand | Xiaomi |
|---|---|
| Device | Redmi 17 / poco c95 pro |
| Model Number | 2606FRN72Y (Global), 2606FRN72L (Latin America, Japan) |
| Codename | leedsa |
| Chipset | Mediatek Helio G91 Ultra |
| OS Version | HyperOS / Android 16 |
| Storage Variants | 128GB / 256GB |
| RAM Variants | 4GB / 6GB |
| Approx. Total Size | 9.0 GB |
| Recommended Tool | Mi Flash Tool |
Fastboot vs Recovery ROM — Which One Do You Need?
It's easy to grab the wrong file here, so let's keep it simple. A fastboot ROM is the full firmware set, flashed via Mi Flash Tool on a computer — it resets the device entirely, which is exactly why it works for bootloops, dead boot, or a phone stuck at the logo. A recovery ROM instead runs from the phone's own Mi Recovery menu, and is meant for updating, downgrading, or repairing software without wiping your data (backing up first is still a smart move).
🔹 Fastboot ROM
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi 17 / poco c95 pro | leedsa | Fastboot ROM | OS3.0.305.0.WDTMIXM | 16 | 9.0 GB | 2026-07-24 |
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi 17 / poco c95 pro | leedsa | Fastboot ROM | OS3.0.303.0.WDTMIXM | 16 | 9.0 GB | 2026-06-23 |
🔹 Recovery ROM
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi 17 / poco c95 pro | leedsa | Recovery ROM | OS3.0.303.0.WDTMIXM | 16 | 5.6 GB | 2026-08-10 |
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi 17 / poco c95 pro | leedsa | Recovery ROM | OS3.0.305.0.WDTMIXM | 16 | 5.6 GB | 2026-08-10 |
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi 17 / poco c95 pro | leedsa | Recovery ROM | OS3.0.301.0.WDTMIXM | 16 | 5.6 GB | 2026-08-10 |
Tools You'll Need
Get the flashing tool and the right USB driver set up on your PC before you start — in most cases, a failed flash has more to do with a missing driver than with the firmware file.
How to Flash Redmi 17 / poco c95 pro Using Mi Flash Tool
- Download the fastboot ROM and extract it fully — don't skip extraction, Mi Flash Tool won't read a zipped folder.
- Install Mi Flash Tool from the link above and open it.
- Power off the phone, then hold Volume Down + Power together to boot into Fastboot mode.
- Connect the phone to your PC using a good-quality USB cable — cheap cables are a common cause of connection drops mid-flash.
- In Mi Flash Tool, click "Select" and point it to the extracted firmware folder.
- Once the COM port is detected, hit "Flash" and let it run — don't disconnect the phone during this step.
- The phone will reboot on its own once flashing finishes. First boot can take a few minutes longer than usual, so give it time.
Common Flashing Errors and How to Fix Them
"Auth file needed" — this usually shows up when the connected Mi account isn't authorized for flashing. You'll need an authorized account, or a test-point based flash for unlocked devices.
"COM port not detected" — almost always a driver issue. Install the Qualcomm/MediaTek USB driver from the link above, then put the phone back into EDL or Fastboot mode and try again.
"Flashing failed" partway through — try a different USB cable or port first; if that doesn't help, re-extract the firmware in case a file got corrupted during download.
Frequently Asked Questions
Is this firmware official?
Yes, these are unmodified stock builds pulled directly from Xiaomi's own update servers.
Will flashing delete my data?
Fastboot flashing wipes the device, so back up anything important first. Recovery flashing is less destructive but a backup is still a good idea.
My model number doesn't match exactly — can I still use this?
Make sure the codename matches leedsa exactly, as listed above. Using firmware meant for a different variant or region can brick the device.
0 Comments
Write Your Problem in the Below Comment Box