Vivo V70 5G Stuck that's frozen on the boot screen, FRP-locked, or just refusing to cooperate? Here's the fix that actually works. Since the test point route is generally tried before anything involving chip removal or board-level work. This guide covers the exact test point location for the PD2529F — Vivo V70 5G Test Point — and walks through the full process step by step.

The PD2529F is built around a Qualcomm SM8635 Snapdragon 8s Gen 3, which means Qualcomm EDL 9008 (HS-USB QDLoader) is the mode you'll need to trigger. From there, AMT Tool, Unlock Tool, UMT Tool should pick up the device, giving you access to FRP reset, flashing, and IMEI fixes.

Before you start: Don't skip this — Qualcomm USB Driver has to be installed beforehand, or Windows won't recognize the device even with a perfect short.

PD2529F Device Information

Model Number	PD2529F
Device Name	Vivo V70 5G
Chipset	Qualcomm SM8635 Snapdragon 8s Gen 3
Test Point Mode	Qualcomm EDL 9008 (HS-USB QDLoader)
Android Version	Android 16, up to 4 major Android upgrades, OriginOS 6
Test Point Type	Hardware shorting (motherboard)

What You Need Before Starting

DriverQualcomm USB Driver

Flash ToolAMT Tool, Unlock Tool, UMT Tool

HardwareFine-tip metal tweezers or thin wire

CableOriginal or good quality USB data cable

PCWindows 7 / 10 / 11 (64-bit recommended)

OptionalPlastic pry tool, heat gun for back cover

PD2529F Test Point / EDL Point Location

The PD2529F's test point is just two tiny gold pads on the board. Short them and connect USB at the same time, and the phone forces itself into Qualcomm EDL 9008 (HS-USB QDLoader).

PD2529F Vivo V70 5G test point EDL point location pinout motherboard

Vivo V70 5G PD2529F — Test point / EDL point location on motherboard

Important: Short only the correct pads shown above. Wrong contact can permanently damage the device.

How to Enter PD2529F Test Point Mode (Step-by-Step)

Note: This involves opening the device physically. Hardware damage is not reversible.

1Power off the device. Get the phone into a full power-off state first. A simple restart skips this and isn't the same thing.
2Remove the back cover. Use a plastic pry tool to work the back cover off, going slowly around the edges. Glued panels respond well to 20-30 seconds of gentle heat first.
3Disconnect the battery. Remove the battery connection first, using a non-metallic tool. It only takes a second and it's there purely for safety.
4Locate the test point pads. Compare the board in front of you with the pinout image above to find the two gold contact points.
5Short the test points. Press your tweezers firmly across both pads at once and hold steady — don't let the contact slip.
6Connect USB cable to PC. Keeping contact steady, plug in the USB cable. Qualcomm EDL 9008 activates automatically the moment it connects.
7Verify in Device Manager. In Device Manager, check the Ports section for "Qualcomm EDL 9008". Its presence confirms the mode is active.
8Release the tweezers once confirmed. Device stays in EDL mode while USB is connected.
9Open your flash tool and proceed. AMT Tool, Unlock Tool, UMT Tool should detect it automatically.

 Tip: If Device Manager shows "Unknown Device", reinstall Qualcomm USB Driver and repeat. Use a rear USB port, not a hub.

Flash Tools That Support PD2529F in Test Point Mode

Once the PD2529F is in Qualcomm EDL 9008, these tools are confirmed to work:

Flash Tool — operations

Frequently Asked Questions

Usually one of three culprits: a driver issue with Qualcomm USB Driver (fresh reinstall as Administrator fixes most cases), dirty test point pads, or a USB cable/hub that isn't passing data properly.

Yes, if you disconnect the battery first and short only the correct pads in the pinout image. Risk comes from touching wrong components or using excessive force near SMD parts.

Entering this mode alone does not erase data. Any FRP reset or flash performed in EDL mode will erase data. Always inform the customer first.

Disconnect USB and reconnect the battery. If it still won't boot, flash the stock ROM in EDL mode to restore firmware.

Please follow the complete step-by-step guide above for PD2529F. Each step is explained in detail, including what tools you need and how to verify success.