Micromax Bolt D303 Flash Successfully done with SP Flash tool (tested)

Actually this device when first time take customer in my shop then in issue of restarting so first i try to hard reset for solution some devices done from hard reset issue of restarting, hang on logo but this is not success so try in flash but need before flash stock rom firmware must be working well or tested if your firmware not tested then your device will be dead or other issue so everyone must remember that before check firmware after try in flashing here some impotent of required and we are mention required in below so just check it first after try in flash i suggest everyone who working in software related which one first read all are carefully read this content after try in flash and also suggest of must be working well required for flash so remember this all are, see below description about firmware stock rom.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Micromax Bolt D303 Model Screenshot:

Download Link

Micromax Bolt D303 Stock Rom Firmware Download here

Micromax Bolt D303 Flash tool Download here

Micromax Bolt D303USB Flashing Driver here

• Micromax Bolt D303 device with good battery charged
• Micromax Bolt D303 tested Stock Rom Firmware
• Micromax Bolt D303 Flash tool
• Micromax Bolt D303 USB Flashing Driver
• Micro USB Cable
• Computer or Laptop

• Download all are required from above link (if link not working just leave me comment)
• Extract to as you like path (must be installed winrar software in computer)
• Open SP Flash tool folder and choose flash_tool.exe file and open it
• Choose Scatter-loading button and choose MT6572_Android_scatter.txt file
• Choose Download button and Press and hold Volume Up button and insert usb cable
• Wait until driver install, if driver not installed automatically just update from above link driver
• Wait until android os install (do not disconnect while device in flashing mode)
• Congratulation you are done

Micromax Bolt D303 Flash Successfully Screenshot: