-->
Saturday, January 02, 2016

LG G PRO LITE D686 Flash done with flash tool

Posted by
Saturday, January 02, 2016
Sponsored Links
This tutorial done by me after much hard work because this device i was in the last 5 days it has solution for this tutorial need to firmware or flash tool, this tutorial write easy content because every body better understand for flash first read carefully all tutorial after try in flash because some topic miss then you can't flash this device so please batter understand first after following.

Below given software problems:
This flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
This tutorial tested by me without any problem, this is easy way to USB debugging enable just remember impotent for this job, first of must check your device battery that is charged up to 80% and also check micro USB cable it is also working well if not working then you can't do this job because done this job must both impotent need for this, this is done by me in miracle box if you don't have miracle box you can't do this job. Must also need miracle box with key without that you can't do this job.

Must Read before use:
If want to repair device, can try to repair it by. have to charge a battery with any charger and charged it by 95%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

Download Link
LG G PRO LITE D686 Firmware Download Original | here
LG G PRO LITE D686 Flash tool Download here
LG Support Tool | Download
LG G PRO LITE D686 USB (Flashing) Driver Download here

Required for flash:

  • LG G PRO LITE D686 device with good battery charged
  • LG G PRO LITE D686 tested firmware
  • LG G PRO LITE D686 Flash tool
  • LG Support Tool
  • Micro USB cable
  • Computer or Laptop

Procedure:

  • Download tested firmware or flash tool from above link (how to download firmware check above gif image)
  • Extract to desktop or as you like path
  • First Install LG Support Tool or LG Android USB Driver
  • Open LG Flash Tool 2014 folder and choose LGFlashTool2014.exe file
  • Choose 3GQCT model option
  • Choose DIAG from PhoneModel option
  • Click on Firmware button and choose V20C_00.kdz file
  • Click on Normal Flash button (see below image tutorial)
  • Insert charged battery in to device
  • Press and hold Volume Up and insert USB cable for Download Mode
  • Click on Start button (see below image)
  • Wait for flash window automatically detect device
  • Wait until full flash (do not disconnect device)
  • You are done

LG G PRO LITE D686 Flash done with flash tool screenshot:

LG G PRO LITE D686 Flash done with flash tool video:

Sponsored Links

59 comments:

  1. Replies
    1. My pleasure :) thank you for comment here and keep visit our blog for more information :)

      Delete
  2. driver not detect how solved this?

    ReplyDelete
  3. cant enter download mode, only blank screen, always disconected while progress happen

    ReplyDelete
    Replies
    1. Press and hold Volume Up button and Insert usb cable for Download Mode

      Delete
  4. tq for tutorial and link, successfully...mantaf

    ReplyDelete
  5. i have done all steps after hitting exit nothing happned just lg logo

    ReplyDelete
    Replies
    1. If you are all steps following and not done understand hardware problem in your device ? i think

      Delete
  6. hi firmware link is not work give me link sir

    ReplyDelete
  7. how to solve Connection to server failed. try again in a moment i get this when im in flashing mode step 3

    ReplyDelete
    Replies
    1. First check handset USB Socket and also check Micro USB Cable must be good quality Note : This procedure for offline not online so there no need any server

      Delete
  8. I CANT ENTER TO DOWNLOAD MODE . IM GOING TO PRESS AND HOLD VOLUME UP UNTIL I INSERT THE USB CORD ?

    ReplyDelete
    Replies
    1. First turn off device, Insert battery into phone, Pres and hold Volume Up button and Insert USB Cable, device will go to Download Mode

      Delete
  9. Replies
    1. There many link brother you can download from the any link it's simple just click on get link

      Delete
  10. After analyzing pc setting and extracting s/w, error reflect on pc i.e connection to server failed. what is it ??? how can i resolve it

    ReplyDelete
    Replies
    1. Means your device not detect with Flash tool OR if detect device then not installed Driver in your PC LG USB Driver Download here

      Delete
  11. Hi Sir, I always get a Problem:
    lgusercstool stopped working
    Help sir ive been repeating all the steps but still same problem happens.

    ReplyDelete
  12. Hello,
    I have problem, when install firmware stuck on 99% and give me error "lguserctool stopped working"

    ReplyDelete
    Replies
    1. This tested in Windows 7 32bit ultimate, and also check battery if low first full charged it and try again

      Delete
  13. Ok, thanks for the answer. :)
    I install firmware, but i have now android lying down dead icon or if you don't understand this is link of the image:
    http://img.photobucket.com/albums/v677/nickdalzell1/image-2_zps0de7d136.jpg
    Can you help me with this please,what i need for fix that problem? :S

    ReplyDelete
    Replies
    1. Brother just you have to use Volume Up button and Insert USB Cable and will starting download must be Installed USB Driver

      Delete
  14. I do that and i install a new firmware i don't have problem with enter in "Download Mode", but phone every time stuck on logo when i try get in recovery mode he show me the Android Dead icon. :S

    ReplyDelete
    Replies
    1. This is no dead icon recovery logo use any key for recovery option try power, volume up , volume down and do hardreset first then check i think will be solve

      Delete
  15. Has stopped working step 3 99%... what this problem ? Cable or Handphone or computer ??

    ReplyDelete
    Replies
    1. First Battery charge up to 90% and try and this is done with windows 732bit ultimate

      Delete
  16. V20D_00.kdz version of firmware consuming the battery rapidly. sir if you have older versions of firmware like V20B_00.kdz or V20C_00.kdz then share the link. i've tried but i was not able to download those firmwares.

    ReplyDelete
    Replies
    1. The firmware which you've uploaded(V20C_00.kdz) is of size only 380MB, but i previously downloaded from some other source which is of nearly 800MB. is it safer to flash the firmware which you've uploaded? i'm waiting for your reply sir.

      Delete
  17. does this work on lg g pro lite d682 ? i can't get past the setup wizard

    ReplyDelete
    Replies
    1. Download Stock ROM from here, and using this post tool and procedure :) Good Luck

      Delete
  18. step 3 4% not working.my problem boot certification verification 1 error

    ReplyDelete
  19. please help bro, on step 3 (S/W Upggrade) failed, Solution Please?

    ReplyDelete

  20. I've tried to flash, but after the flash and restart my phone back bootloop
    try to go into recovery (power + volume down) does not work, appear "green robot to sleep)

    EMMC is this damage?

    thank you

    ReplyDelete
  21. Can you make tutorial to flash LG G pro lite using MediaTek SP Flash Tool?

    ReplyDelete
  22. its my lg d686 and i have problen saying ERROR:boot certicication verification,,and its always shows its lg logo and doesnot open the phone...i dont think to solve by flash tool because the phone doesnot open........what can i do....

    ReplyDelete
    Replies
    1. Must be installed LG Support Tool after that open flash tool

      Delete
  23. hello can help me sir..
    have error "lgusercstool lgmobile application has stopped working" when trying to flash....then it says cannot connect to server...

    ReplyDelete
  24. Hi GSM Helpful..
    thank you for the tutorial.. ive bricked my LG phone d686.. I use CSE-FLash Tool in LG Flashtool to flash the phone, everything works fine, until process 3 in extraction.. the application stopped working.. ive checked the driver, and mic. c++ runtime, and try in another computer, it still stopped working after extraction..
    can you find where the problem is ?
    btw, my phone is in dead android condition. but i can still enter to download mode.
    just why LG Flash tool always stopped working after extraction.

    sorry for mylanguage.. hope u can understand what I mean
    thank you

    ReplyDelete

Write Your Problem in the Below Comment Box