Samsung Galaxy M17e 5G (SM-M076B) Flash File Download (Stock ROM)

Whether your Samsung Galaxy M17e 5G is soft-bricked, stuck at the boot screen, or you simply want to move back to full stock firmware, this guide covers every available build for the device, a working download link, and a complete Odin flashing walkthrough.

Before you download: full firmware flashing via Odin wipes all data, so back everything up first. And always confirm the CSC/region code matches your device — using firmware from the wrong region can lead to problems after flashing.

Samsung Galaxy M17e 5G SM-M076B Stock ROM Flash File Download Guide

Device Overview

Brand	Samsung
Device	Samsung Galaxy M17e 5G
Model Number	M076B
CSC / Region	INS
Chipset	Mediatek Dimensity 6300
Recommended Tool	Odin

Available Firmware Versions

M076BXXS3BZF4

AP VERSION : M076BXXS3BZF4

ANDROID VERSION : B(Android 16)

BIT : 3

BUILD DATE : 20260611124010

SECURITY PATCH : 2026-06-05

Download

M076BXXU2BZE3

AP VERSION : M076BXXU2BZE3

ANDROID VERSION : B(Android 16)

BIT : 2

BUILD DATE : 20260521145915

SECURITY PATCH : 2026-05-05

Download

M076BXXS2AZC1

AP VERSION : M076BXXS2AZC1

ANDROID VERSION : B(Android 16)

BIT : 2

BUILD DATE : 20260312175610

SECURITY PATCH : 2026-02-05

Download

M076BXXU1AZA1

AP VERSION : M076BXXU1AZA1

ANDROID VERSION : B(Android 16)

BIT : 1

BUILD DATE : 20260122190510

SECURITY PATCH : 2025-11-01

Download

Links above point to the firmware's official page — the actual file download starts from there. Full firmware files are large, so make sure you have a stable connection before starting.

How to Flash Samsung Galaxy M17e 5G Using Odin

Download the firmware and extract the .zip fully to get the .tar/.tar.md5 file — Odin won't read a zipped folder.
Install Odin and the Samsung USB driver from the links below, then open Odin.
Power off the phone, then hold Volume Down + Volume Up and connect the USB cable to boot into Download Mode. Press Volume Up to confirm.
Connect the phone to your PC using a good-quality USB cable — cheap cables are a common cause of connection drops mid-flash.
In Odin, click "BL", "AP", "CP", and "CSC" and select the matching files extracted from the firmware package.
Once the port shows as connected (blue/green "COM" box), hit "Start" and let it run — don't disconnect the phone during this step.
The phone will reboot on its own once flashing finishes. First boot can take a few minutes longer than usual, so give it time.

Common Flashing Errors and How to Fix Them

"FAIL!" in Odin — usually a wrong CSC/region combination or a corrupted file. Re-download the firmware and confirm the CSC code matches your device.

Phone not detected in Odin — almost always a driver issue. Install the Samsung USB driver from the link below, then re-enter Download Mode and try again.

Stuck at "SW REV CHECK FAIL" — this means you're trying to downgrade the bootloader/binary version, which Samsung blocks by default. Flash a firmware with an equal or higher binary number instead.

Frequently Asked Questions

Is this firmware official?
Yes, these are unmodified stock builds.

Will flashing delete my data?
A full firmware flash (BL+AP+CP+CSC) wipes the device, so back up anything important first.

My model number doesn't match exactly — can I still use this?
Make sure the CSC/region code matches INS exactly, as listed above. Using firmware meant for a different region can leave features like network bands mismatched.

Tools You'll Need

Make sure Odin and the correct USB driver are already installed on your computer before you begin. More often than not, a flash fails because of a driver problem, not the firmware itself.

Odin Tool (All Versions) Samsung USB Driver