-->
Wednesday, December 14, 2016

How to Remove Pattern Lock in Oppo F1s A1601

Posted by
Wednesday, December 14, 2016
Sponsored Links
If you've forgotten the pattern lock on your OPPO F1s (A1601), you can remove it using the SP Flash Tool. Follow these detailed steps to unlock your device safely and efficiently.

Requisite Oppo F1s A1601

  1. Oppo F1s A1601 phone with good battery charged, do not try with low battery
  2. Oppo F1s A1601 Stock ROM Firmware
  3. Oppo F1s A1601 Flash Tool
  4. Oppo F1s A1601 USB (Flashing) Driver
  5. Micro USB Cable with Good Quality
  6. Computer or Laptop
  7. WinRAR Software: Ensure that WinRAR is installed on your computer or laptop. If it's already installed, you can skip this step.
  8. Required Files: Download the necessary files for flashing from the provided link. If the link is dead or there are any issues, leave a comment below the article, and I'll fix it as soon as possible.

Steps to Remove Pattern Lock

1. Extract Files:
  • Use WinRAR to extract the downloaded files to your preferred location, preferably the desktop for easier access.
  • Navigate to the SP Flash Tool folder.
  • Locate and open the flash_tool.exe file.
  • Click the "Scatter-loading" button within SP Flash Tool.
  • Select the MT6755_Android_scatter.txt file from the [up_vnROM.net]_Oppo_F1s_(A1601)_MT6755_v5.1 folder.
4. Select USRDATA Only:
  • In the list of files, untick all options except for USRDATA.
5. Start the Flashing Process:
  • Click the "Download" button in SP Flash Tool.
  • Connect your OPPO F1s to the computer using a USB cable.
6. Driver Installation - OPPO F1s (A1601) USB Driver:
  • Wait for the drivers to install automatically. If they don't, manually update the drivers from the provided link.
7. Troubleshooting Connection Issues:
  • If the device is not detected or appears dead, try holding the Volume UP button while connecting the USB cable. Alternatively, you can use the Volume DOWN button if the Volume UP button doesn't work.
8. Complete the Flashing Process:
  • Wait for the process to finish. Do not unplug the device while it is in flashing mode.
Sponsored Links

22 comments:

  1. in scatter loading button that uh told to choose the option , the option is not showing

    ReplyDelete
  2. Replies
    1. Check above comment of success what fake if you have figure lock then follow this here

      Delete
  3. Replies
    1. Mobile unplug karo aur der tak power button daba rakho jab tak phone vibrate nahi hota

      Delete
  4. Replies
    1. first install driver and after that connect phone with computer using Volume Up + Down and Insert USB cable

      Delete

Write Your Problem in the Below Comment Box