06 January 2016

Gionee P6 Flash done with flash tool

Posted by
06 January 2016
Sponsored Links

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Gionee P6 Firmware download here
SP_Flash_Tool Download here

Required for flash:

  • Gionee P6 device with good battery charged (do not flash with low battery)
  • Gionee P6 tested firmware (Gionee_P6_0401_T5865)
  • SP_Flash_Tool_v5.1532 Flash tool
  • Micro usb cable
  • Computer or Laptop


  • Download tested firmware or flash tool from above link (if link not working just write down comment box below comment box)
  • Extract to both files to desktop or as you like path
  • Open SP_Flash_Tool_v5.1532 folder and choose flash_tool.exe file and open it
  • Click on Scatter-loading button and choose MT6582_Android_scatter.txt file from Firmware folder
  • Click on Download button
  • Press and hold Volume Up button and insert usb cable (must be working device key or micro usb cable)
  • Wait until driver install, if driver installed in your computer or laptop then downloading start automatically
  • Wait until full installed (do not unplug device while start flashing)
  • You are done

Gionee P6 Flash done with flash tool screenshot:

Gionee P6 Flash done with flash tool video:

Sponsored Links


Write Your Problem in the Below Comment Box