18 December 2015

Videocon A48 Flash done with flash tool

Posted by
18 December 2015
Sponsored Links

Must Read:
This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
VideoCon A48 Firmware or flash tool Download here

Required for flash:

  • Videocon A48 device with good battery charged
  • Videocon A48 tested Firmware (H20_X4503V_R12_DS_NSL_Band15)
  • Flash tool (Brcm_FlashLoader_1300)
  • Micro usb cable
  • Computer or Laptop


  • First download tested firmware or flash tool from the above link
  • Extract to desktop or you like path
  • Open Tools & Driver folder and choose Flash tool and open it
  • Click on Setting button
  • Click on Firmware button and choose android_hawaii_garnet_c_a18 folder and click on Ok button
  • Click on Auto button from Drive Type option
  • Click on Apply button

  • Press and hold Volume Down button and insert usb cable (must be working device key)
  • Wait until driver install, if driver installed then downloading automatically in to device
  • Wait until full flash
  • You are done

Videocon A48 Flash done with flash tool screenshot:

Videocon A48 Flash done with flash tool video:

Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box