13 November 2015

Micromax Canvas Nitro A310 Flash done with flash tool

Posted by
13 November 2015
Sponsored Links

Micromax Canvas Nitro A310 flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.
If want to repair Micromax Canvas Nitro A310 device, can try to repair it by. have to charge a battery with any charger and charged it by 90%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

Download Link
Micromax Canvas Nitro A310 Download here
Micromax Canvas Nitro A310 Flash tool Download here
Micromax Canvas Nitro A310 USB (Flashing) Driver Download here

Required for flash:

  • Micromax Canvas Nitro A310 device with battery charged
  • Micromax Canvas Nitro A310 tested firmware
  • YGDP flash tool
  • Micro USB cable
  • Computer or Laptop

Procedure:

  • Download Firmware or Flash tool from above link
  • Install YGDP_Setup_V3.98_Assembly.exe
  • Check desktop there to be icon for YGDP flash tool open it

  • Write down password : 369 in Password box then click on Login button
  • Click on Config button and click on CPB file button and choose 4.4.030.P0.140808.8297W_I01.CPB file
  • Click on Apply button wait until process
  • Now Click on Start button and Insert usb cable in device without battery then start automatically starting download and wait until full flash (see below image)


Sponsored Links

6 comments:

  1. hello can u give me detisl about cpb file i didnt get it

    ReplyDelete
    Replies
    1. Link has been updated but you can download from the here

      Delete
  2. Hello sir
    Start pe click krne ke bad bettery nikal ke device ko connect kr rha hu to connect nhi ho rha
    Wese driver le rha h
    How to solve

    ReplyDelete
    Replies
    1. nahi without battery flash hota hai battery ki jaroorat nahi hai

      Delete
  3. flashing ok but hang on logo solution what are you doing help plzzz

    ReplyDelete

If any problem just write down your message on below comment box