-->
Friday, December 30, 2016

How to Update Kitkat to Lollipop in YU Yureka Plus YU5510A

Posted by
Friday, December 30, 2016
Sponsored Links
YU Yureka Plus YU5510A in any type issue software related you can easy solve using this method and this is for everyone who new fresher technician or experience technician in android software related, before use remember must be working well all are required which you can see in this method it below to be mention, different to be error when you try to flash or upgrade first of USB not recognized this error possible when micro USB not working, battery not charged, phone USB socket not working properly so if you fail with this method just write down your comment on below comment box i will soon possible to fix it, first take backup into device if live otherwise dead you can't take backup, this method use when device in dead condition also but must be in software problem in hardware device not be live.
If software related issue in YU Yureka Plus YU5510A so use this guide really awesome and easy to use without any box and this is version of Yu_Yureka_Plus_V1_15.07.09 but if different version in your device then download first it and following same method no any different for another version, this method you can use without any box its done from flash tool its also available here, and impotent of must be installed phones driver, you can't flash or upgrade if not installed in your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try, you can use this guide when your device in hang on logo, restarting, auto turn on internet connection, auto turn on wifi connection, auto apk installing, auto gone balance, pattern lock, screen lock.
Must Read before following:
If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 70%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details, your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, SD card or any other suitable devices. If you are doing by your own.do it at your own risk as we don't take any responsibility if your device is damaged

Download Link
YU Yureka Plus YU5510A Stock ROM (Flash files)

YU Yureka Plus YU5510A USB Driver

YU Yureka Plus YU5510A Flash tool

Required for YU Yureka Plus YU5510A:

  • YU Yureka Plus YU5510A phone with good battery and do not try with low battery
  • YU Yureka Plus YU5510A Tested Stock ROM Firmware
  • YU Yureka Plus YU5510A Flash tool
  • YU Yureka Plus YU5510A USB (Flashing) Driver
  • Good Quality Micro USB cable
  • Computer or Laptop

Procedure YU Yureka Plus YU5510A :

  • First Downloading required from above link, if link not working just leave your comment on below comment box i will soon fix it if possible
  • Extract to anywhere you want or Desktop from the WinRAR, must be installed WinRAR software in your computer or laptop
  • Install YGDP_Setup_V3.98_Assembly.exe
  • Check desktop there to be icon for YGDP flash tool open it
  • Write down password : 369 in Password box then click on Login button
  • Click on Config button and click on CPB file button and choose 4.4.001.00.P1.150709.8675_I02_ROM.CPB file
  • Click on Apply button and wait a few minute until properly read flash file
  • Click on Start button, Press and hold Volume Up and Insert USB Cable

  • Wait until Driver Installing, if already installed in your Computer or Laptop then Download Start automatically into device
  • Do not try to Unplug device while flashing mode
  • Congratulation you are done
      YU Yureka Plus YU5510A Flash done Screenshot:


      YU Yureka Plus YU5510A Flash done video:
      Sponsored Links

      39 comments:

      1. my yureka version is YU5510A running on stock kitkat
        Can i follow this method..?

        ReplyDelete
        Replies
        1. Yes but before check hardware which is shorting :) if to be software problem then 100% working :) cause tested by me

          Delete
        2. sorry sir, did not get u...:(
          actually i hard brick my device while trying to install 12.1 in YU5510A.
          there are two devices(i.e YU5510 & YU5510A) which make me confuse.
          also can i install TWRP recovery after this...and Unlock Bootloader...??

          Delete
        3. bootloader unlock After that triggered much time feel

          Delete
      2. hello My device is Yu Yureka Plus YU5510A running on android kitkat 4.4.4. build number 4.4.017.p1.160204.YU5510A. can i use this method to update it to lollipop or do i have to unlock bootloader etc.
        If unlockin required could u please make a tutorial of how to unlock bootloader before flashing this.
        thanks a lot in advance.

        ReplyDelete
        Replies
        1. Download this zip here and in this zip to be unlock bootloader bat file just put device in fastboot mode and run that .bat file

          Delete
        2. so if i install custom recovery and root wont it effect the fast boot rom installation cause fastboot method rewrites everything right...?

          Delete
        3. No brother better is full flash its better for device I think

          Delete
      3. Replies
        1. Yes this is tested by me in this site all are tutorial tested by me

          Delete
      4. YU5510A H/W ver P2. S/W ver P0.160314 FRP LOCK HELP ME.

        ReplyDelete
      5. Sir i want 5.1.1 lollipop for yu5510A not for yu5510

        so please send me the link and help me please

        ReplyDelete
      6. while flashing, error occurs every time. mine is cell3...once I clicked start, cell 3 turns to RED with CROSS on it. please help

        ReplyDelete
      7. i did flash as u said i have upgraded to lollipop ,,,thaks alot sir ,, now i want to add volet support how can i please help bro soon ....

        ReplyDelete
      8. when i click on download option
        it gives file not found
        can u share the file

        ReplyDelete
      9. When I start to flash and press the start button, none of the cells react anything. it just doesn't detect my device is connected but it shows up in my folder. what to do

        ReplyDelete
      10. Bhai i need flash file s/w p0 160314 h/w p2 sir i urgent need this flash file.please help me....

        ReplyDelete
      11. after following above steps nothing is happening, it is in entering download mode from one hour. Generally how much time it will take

        ReplyDelete
      12. I need flash file YV5510A s/w P0 160314 h/w P2. If you have than please share link.....

        ReplyDelete

      Write Your Problem in the Below Comment Box