-->
Tuesday, June 28, 2016

How to Flash CoolPad Dazen 1 8297L-100 with Flash tool ? (Tested)

Posted by
Tuesday, June 28, 2016
Sponsored Links
CoolPad Dazen 1 8297L-100 in problems of auto turn on internet connection, auto turn on wifi connection, auto apk installing, auto gone balance, pattern lock, screen lock, i try with reset device but not success problem not done same issue then decide to full flash and it's working well without any try problem just plug device and done, If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 70%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, sd card or any other suitable devices. If you are doing by your own.do it at your own risk as we don't take any responsibility if your device is damaged
CoolPad Dazen 1 8297L-100 in any type issue software related you can easy solve using this method and this is for everyone who new fresher technician or experience technician in android software related, before use remember of must be working well all are required which you can see in this method it below to be mention, different to be error when you try to flash or upgrade first of USB not recognized this error possible when micro USB not working, battery not charged, phone USB socket not working properly so if you fail with this method just write down your comment on below comment box i will soon possible to fix it, first take backup into device if live otherwise dead you can't take backup, this method use when device in dead condition also but must be in software problem in hardware device not be live

Download Link
CoolPad Dazen 1 8297L-100 Flash file (Stock ROM)

CoolPad Dazen 1 8297L-100 USB Driver

CoolPad Dazen 1 8297L-100 Flash tool

Requirement for CoolPad Dazen 1 8297L-100

  • CoolPad Dazen 1 8297L-100 phone with good battery charged, do not try with low battery
  • CoolPad Dazen 1 8297L-100 Stock ROM Firmware Tested
  • CoolPad Dazen 1 8297L-100 Flash tool
  • CoolPad Dazen 1 8297L-100 USB Driver
  • Micro USB Cable with Good Quality
  • Computer or Laptop

Procedure for CoolPad Dazen 1 8297L-100

  • First Downloading required from above link, if link not working just leave your comment on below comment box i will soon fix it if possible
  • Extract to anywhere you want or Desktop from the WinRAR, must be installed WinRAR software in your computer or laptop
  • Open YGDP_Setup_V3.98_Assembly folder and choose .exe file and install it
  • Open YGDP_Assembly.exe file from the C:\YLXZGJ\YGDP path
  • Type PassWord : 369 and Hit Enter key
  • Click on Config button and Click on CPB file folder option and select 4.4.120.00.T1.150511.8297L_I00.def.CPB file from the Firmware folder
  • Click on Apply button and Wait until Read file
  • Now Click on Star button and Press and hold Volume Up and Insert usb cable Again Press Volume up for download mode confirm
    Insert USB Cable, Wait until Driver Installing already driver installed in your computer or laptop then downloading start automatically
  • Wait until finished process, do not disconnect device while in flashing mode
  • Congratulation you are done
CoolPad Dazen 1 8297L-100 Flash done Screenshot:


CoolPad Dazen 1 8297L-100 Flash done video:
Sponsored Links

124 comments:

  1. the download progress goes till 92%...after ward its stops

    ReplyDelete
    Replies
    1. Charge your battery up to 90% then try again

      Delete
    2. Try to flash with another method if not done then understand in hardware issue i think cause this error facing also with me not solve by me if any comes solution for that I will do post

      Delete
    3. it did not recognize the device.
      bootloader is missing or corrupt.
      it is like an empty device.
      how to connect n detect by pc???

      Delete
    4. its flashing via fastboot mode Press and hold volume Up + Power key and again Press volume Up button for confirm

      Delete
  2. thanks a lot, i was able to fix which cannot be fixed bt 3 technicians

    ReplyDelete
  3. Tnx
    After pressed start button nothing is happening. Pls help me

    ReplyDelete
  4. my coolpad dazen 1 went dead after updating it to MIUI 8. Can you help me out??

    ReplyDelete
    Replies
    1. Device Detected to Computer or Laptop ?, if detected then check driver in device manager there which detected ?

      Delete
    2. pc not detect my phone... what I do??? help me

      Delete
    3. Charge your battery then try again OR use another battery

      Delete
  5. my downloading progress goes to 11% and it will stopped, please help me. my mobile Battery charge above 80%

    ReplyDelete
  6. my coolpad dazen 1 went dead after updating it to MIUI 8. Can you help me out??

    ReplyDelete
    Replies
    1. Device detected with computer ? if yes then following this method

      Delete
    2. My coolpad dazen 1 also not flashing from ygdp tool. it is not starting from ygdp tool. it says download failed

      Delete
  7. Coolpad dazen 1 not flashing from ygdp tool. Flashing error. It is downloading failed

    ReplyDelete
  8. help me i cant install ygdp assembly.exe im using windows 8

    ReplyDelete
    Replies
    1. Open as Administrator Right click on icon and select Run as Administrator

      Delete
  9. COOLPAD X7 BOOTLOOP ..PLS GIVE A SOLUTION....???????

    ReplyDelete
  10. Sir ,my coolpad dazen is dead and I tried ur above given procedure everything going fine but at the end flashing got error at 0% at shows devicescrnndump error and yes the driver is coolpad android bootloader interference showing in laptop

    ReplyDelete
    Replies
    1. First Charge Full battery after that not solve problem then understand Hardware problem of eMMC

      Delete
  11. help me my device is neither booting in fastboot nor recovery this happend after updating miui.its dead

    ReplyDelete
  12. My coolpad dazen 1 is dead. I went to service center they say you have to change mother board. My phone is not dedacted in computer, can I try this process given by you. Reply

    ReplyDelete
    Replies
    1. If device not detect then this procedure not work in your device must be need Download mode

      Delete
  13. sir it fails at 11% saying cell0 files failed

    ReplyDelete
  14. Thank you bro
    After so much struggle among so many posts, at last, this post helped :)

    ReplyDelete
  15. it always fails at 11%. I charged my phone to 90% but still same, fails at 11%. Should i download the rom again? what to do? the rom which i have is not the one which u provided above. But, i previously used this rom and it worked.

    ReplyDelete
    Replies
    1. brother, i'm not telling this. I'm having this problem and i'm asking for a solution. It always fails at 11%. My battery is charged to 100%.
      I have tried downloading the ROM again but it didn't helped. Plz tell me what to do?
      This is what its report says - http://txt.do/d5ppb

      Delete
    2. I think hardware issue cause same issue I faced but not solve eMMc issue i think

      Delete
    3. Sorry not yet solve that problems from me :) if any result i post first

      Delete
    4. Nothing works idid every thing still stuck 11%

      Delete
    5. You are right brother but some device take 100% per. You can check proof in video which in end of post

      Delete
  16. sir my mobile update and installed suddenly switchoff not open what happening plsssss solve sirrrr

    ReplyDelete
    Replies
    1. First charge Full battery in Detka not use charger cause not properly charging if battery full low

      Delete
    2. Dera Gsm Team.

      i stuck on 11% issue. please help.

      Delete
  17. Tried this method but it fails on 11 percent whether my battery is 100 percent charged

    ReplyDelete
  18. I tried it but it fails at 11 percent although my battery is fully charged.plz help me

    ReplyDelete
  19. hii brother thanks... but when connect the USB it shows ''Information-do not disconnect the data cable''
    what should i do??? please help me

    ReplyDelete
  20. AdbCreateInterfaceByName err NO.:5
    device can not open fastboot channel

    ReplyDelete
  21. koi b button dabane sey sirf vibration ho raha hai ygdp tool sey connect nahi ho rha help mee

    ReplyDelete
  22. hi can u please help i have a dazen 1 its automatically imei number wash and of this the mobile network goen so please help me how can i get back?

    ReplyDelete
  23. hi my coolpad 8297L-100 stops at boot screen and does not go any further how can i install usb drivers

    ReplyDelete
  24. my coolpad dazen 1 did not detect computer
    how to solve this problem?
    in boot mode error

    ReplyDelete
    Replies
    1. Did you try using Press and hold Volume UP button and Insert USB cable then asking confirm for Download Mode then just Press Volume UP until gone Download Mode

      Delete
    2. yes I have tried but then also nothing happening in ygdp

      Delete
  25. Pls find a soln for 11 percent stucked phone
    Regards

    ReplyDelete
    Replies
    1. Some device done and some device not done you can check is command here

      Delete
    2. I have tried many time but nothing work at all.......i things its because of installing custom rom like miui7 etc.

      Delete
    3. You are right brother I will also find this solution if any arrive then update on this site

      Delete
    4. Thanks bro.Me too had installed custom rom.one day stucked up with encryption error and now i am having mount error in TWRP.Planning to install orginal firmware but stuck in 11 percent.

      Delete
    5. Brother wait until properly solution cause I also find this issue running some day

      Delete
  26. Bro i need ur help can u give me ur number whatsapp number.before i can get into bootloader using emmc image which i write into sd card and put into my phone but now cannot unbrick

    ReplyDelete
    Replies
    1. Brother until properly solution cause this type problem to be many people

      Delete
  27. I am strucking with the phone about the 11% error . But nobody can solve it why. Is there any one who can cotect with COOLPAD company to solve the desire . emmc error .! ! What is this . ? Please provide me the required link where I able to back my dezen 1.. Help Help ..

    ReplyDelete
  28. i can't flash my phone, coz my pc. & the Driver can't install my pc, what to do?

    ReplyDelete
  29. my mobile didn't ON even I put the charging. please tell me what type software i will download/

    ReplyDelete
    Replies
    1. Insert USB cable to device and check detect driver or qulcomm driver ? if detect then use this video here method...Good Luck

      Delete
  30. i think my mobile coolpad dazon 1 8297l_i00 ...
    h/w v:T1 s/w v:4.4-137...
    i tried to flash s/w v:4.4.120 and s/w 4.4.150 using ygdp ..
    BOTH versions stops at 11%...
    so i tried QFL method but it says error sahara protocol failed ....
    ++++my coolpad WORKING fastboot mode+++++ but can't boot to recovery...
    ON SWITCHING ON MOBILE UNDER COOLPAD LOGO system *******,****** showing...
    I 'M TOTALLY ********...
    SO PLZ HELP...DUDES

    ReplyDelete
  31. 11% error not solved try all solution if u post plzzzz help me

    ReplyDelete
  32. cool pad dazen hard bricked, when you press power button phone screen shows chinese letters and vibrates for 5mins and then goes off again. I flashed a corrupted recovery. Also hardware not recognised by windows software driver. Please help!

    ReplyDelete
  33. sir please reply me fast,my ygdp is not detecting my phone,I HAVE SUCESSFULLY INSTALLED DRIVERS ALSO..

    ReplyDelete
  34. after flash phone show 1.modem 1/1 and other side show up and down please help mee

    ReplyDelete

Write Your Problem in the Below Comment Box