-->
Wednesday, March 30, 2016

Intex Aqua 4.5E After Flash Dead Solution here (tested)

Posted by
Wednesday, March 30, 2016
Sponsored Links
Hello every one intex aqua 4.5e after flash dead issue ? don't worry here simple solution if you better understand this tutorial because first time i flash device then it dead so i am confuse then i search in internet then i found this solution and i also use this tutorial and i was got success so you can also use this tutorial if your device dead after flash but remember be carefully use i suggest first read carefully full tutorial after following step by step so you fill easy to use, before use some impotent notes first of must be working well micro usb cable, must be working well device or pc usb socket and also must be installed usb drive in computer

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Intex Aqua 4.5E Firmware Download here
preloader_vsun71_e_kk Download here
SP_Flash_Tool_v5.1343.01 Flash tool Download here
Intex Aqua 4.5E Flashing USB Driver Download here

Required for flash:

  • Intex Aqua 4.5E device with well battery charged
  • Preloader_vsun71_e_kk file
  • Android USB Driver
  • Micro usb cable
  • Computer or Laptop

Procedure:

  • Download Intex Aqua 4.5E firmware, Preloader file, SP_Flash_Tool_v5.1343.01 or USB Flashing driver from above link
  • Extract to desktop or as you like path (must be installed winrar software in your computer)
  • Copy preloader_vsun71_e_kk.bin file
  • Open Intex_Aqua_4.5E_V06_Indian_SER firmware folder and Paste Copied file there and do overwrite
  • Now SP_Flash_Tool_v5.1343.01 folder and choose flash_tool.exe file and open it
  • Click on Scatter-loading button and choose MT6571_Android_scatter.txt file
  • Double click on Download button
  • Press and hold Volume Up button and insert usb cable
  • Wait until driver install, if driver installed in your computer then downloading automatically start
  • Wait until full install android os
  • Congratulation you are done

Screenshot:
Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box