-->
Wednesday, June 10, 2015

Intex Cloud Z6 Flash done 100% tested by me

Posted by
Wednesday, June 10, 2015
Sponsored Links
Intex Cloud Z6 Flash done 100% tested by me

This tutorial tested by me without any risk just one time attach device and waiting for until flash you are done but here some required for flashing, first time i use many flash for flash but it was fail then tired in many tool use for flashing then last change to flash in miracle so i try in that after i success in miracle tool i happy. You can use this tutorial when your device goes to pattern lock, screen lock, security lock, hang on logo, restarting problem then you can following this tutorial but remember if you use this tutorial you can't save your data like contacts, photos, videos, etc because this is factory firmware so please remember all are that first read all tutorial after that following this tutorial so now let's go how to flash Intex Cloud Z6 in Miracle box.

Intex Cloud Z6 Firmware or Tool free download here

Required for Flash:

1. Intex Cloud Z6 device with battery charged
2. Intex Cloud Z6 tested Firmware
3. Miracle box
4. Micro usb cable
5. Computer or Laptop

Procedure:

1. Download Firmware from above link
2. Open Miracle tool V2.9
3. Choose spd tab
4. Click on Write button
5. Choose type : SPD8825/6825/7715(Factory File) Boot Mode
6. Click on USB Cable
7. Click on Start button
8. Press and hold Volume Down button and insert usb cable
9. Wait until full flash
10. You are done
Intex Cloud Z6 Flash done in Miracle box

Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box